Skip to content
Advanced course · 10 min

Inputs and application for avocados

See why ORTH holds a phosphite treatment while export fruit is being picked, what it needs from the label, how to calibrate a 200 L sprayer with hand lances, and what a tank mix needs before it is safe.

The whole course in one video
  1. 1

    Pick the plot first

    Open a new chat and tap Plots (All) under the question box. Choose the plot you want advice for. ORTH then works from that plot’s crop, variety, soil and documents, and from the farm weather.

    For avocados Pick one plot of one variety. We picked Lote 1: Hass for export on seedling rootstock, 0.84 ha on a slope, 240 trees from May 2019 at 7 × 5 m, volcanic ash soil, rain-fed with one micro-sprinkler per tree for dry weeks. The main harvest is under way and a low patch at the bottom of the slope stays wet. Every number below is for that plot.

  2. 2

    Start from the Machinery & Equipment button

    For doses and sprayers, tap Machinery & Equipment. ORTH can calibrate your sprayer for a product rate and tank size, check whether your pump and emitters can deliver a plan, or turn a fertigation recipe into injector settings.

    For avocados On Lote 1 we had one product type in mind for the wet patch, so we typed our own question in place of a suggestion.

  3. 3

    Ask about the product before you buy it

    We asked whether a potassium phosphite product is registered for avocado in Colombia against Phytophthora root rot, how it is applied and what to mix for a 200 L sprayer. ORTH’s answer was direct: do not apply it yet, by any method, while export fruit is being picked. In the documents it searched it found no such product registered by ICA for avocado and this disease, and no registration number, method, dose or days before harvest. It added that this does not prove none exists: the exact commercial product has to be looked up in the ICA register. A product registered only as a fertilizer is not cleared to control a disease. Always follow the product label.

  4. 4

    Days before harvest come from the label

    We asked how many days before harvest to stop. ORTH would not give a number without the Colombian label. It said not to assume zero days and not to assume that a trunk injection avoids residues. For fruit going to Europe and the United States the exporter’s residue protocol has to agree as well. What ORTH needs from you: the commercial name and ICA registration number, the concentration, avocado and Phytophthora on the label, the allowed method, the rate, the water volume, the days before harvest, the re-entry time and the maximum number of applications. Send these together with a photo of the use and harvest sections of the label.

  5. 5

    Calibrate with clean water

    While the label is on its way, ORTH has you calibrate with clean water. Clean filters and nozzles, mark the real fill level of the tank, and fix the nozzle and pressure. Catch the flow of each lance for the same measured time. Then spray a number of trees of the sizes you really have, the way the operator normally works, wetting the canopy evenly and stopping before the water runs off. Refill to the mark: litres refilled divided by trees sprayed gives litres per tree. Lote 1 has 240 trees on 0.84 ha, 285.7 trees per hectare, so litres per tree times 285.7 gives litres per hectare.

  6. 6

    Turn the label rate into a tank

    With the calibration done, the tank follows from the way the label states its rate. Per hectare: label rate times the hectares one tank covers, which is 200 L divided by your litres per hectare. Per volume of water: label concentration times the real tank volume, divided by the label’s reference volume. Per tree: rate per tree times the trees one tank covers. ORTH warns not to turn a per-hectare rate into a dose for single trees unless the label allows that method, and to check whether the label sets both a concentration and a maximum per hectare. Calibrate again when the nozzle, the pressure, the operator or the tree size changes. Always follow the product label.

  7. 7

    Keep phosphite apart unless both labels allow the mix

    We asked about mixing phosphite with copper or a foliar fertilizer. ORTH’s default is to keep them apart unless both labels allow the mix. Phosphite can change the acidity of the spray, upset some copper products, leave sediment and raise the risk of burn on leaves and fruit. With fertilizers, calcium, magnesium and some micronutrients can settle out or make the spray too strong. If the labels allow it, do a jar test with the same water and mixing order, and reject a mix that heats, gels, flakes or leaves sediment. A good jar test shows only that the products mix. It says nothing about crop safety, residues or permission. Always follow the product label.

  8. 8

    What changes for green-skin avocados

    For green-skin avocados for the local market the sprayer works the same, but canopy size and spacing change the litres per tree, so those trees are calibrated on their own. ORTH is clear about the rules: the ICA registration, the crop and target on the label, the dose, the days before harvest and the re-entry time all still apply, and selling locally does not make an unlisted tank mix acceptable. The export residue checks may fall away, but only for a lot that is kept truly separate. Keep local and export trees, spray records and harvested lots apart, and watch the drift between them.

Tip. Save your calibration as a field note on the plot: litres per tree, nozzle, pressure and date. ORTH uses it the next time you ask for a tank.

Check yourself

1. Why did ORTH hold the phosphite treatment?

2. You refill 60 L after spraying 20 trees. How many litres per tree?

3. What does a good jar test show?

4. For local-market fruit, do the days before harvest on the label still apply?

Sources: ICA: regulación y control de plaguicidas químicos

More courses for avocado

Inputs and application

Meet ORTH at DATAGRI 2026 · Valladolid, 18–19 Nov · 10% off ORTH Teams & EnterpriseClaim your 10%