Skip to content
Advanced course · 11 min

Inputs and application for citrus

Find what you can apply now, work out the dose for your tank, pick the spray window and check what mixes safely.

The whole course in one video
  1. 1

    Start from the Machinery & Equipment button

    For doses and sprayers, tap Machinery & Equipment. ORTH can calibrate your sprayer for a product rate and tank size, check whether your pump and emitters can deliver a plan, or turn a fertigation recipe into injector settings.

    For citrus Citrus sprays often go out in large tanks, so ask for the dose per hectare and per tank together. ORTH then also says how many hectares one tank covers, as in the next step.

  2. Case 1

    Spraying three weeks before harvest

  3. 2

    Ask what you can apply now, and for which tank

    We asked what we could apply on Mandarinos three weeks before harvest, with the dose per hectare and per 2,000-litre tank. ORTH listed products authorised in Spain, then said not to treat yet: the farm record from 21 October still described catches as low, so first count flies per trap per day. Above the threshold it preferred a spinosad bait at 1 to 1.5 L/ha in only 4 to 10 L of spray per hectare, and warned not to dilute it in a full 2,000-L tank. For a full-cover spray it worked out the tank: azadirachtin at 1.95 L/ha in 1,000 L/ha, so 3.9 L per 2,000-L tank for 2 ha.

  4. 3

    Pick the spray window and protect yourself

    ORTH checked the farm weather: wind of 15 to 19 km/h meant no spraying that afternoon, with a better window the next day. It also asked for the re-entry time and the protective equipment from the current label, and for the buyer’s clearance where export residue limits were not confirmed.

  5. Case 2

    Mixing oil and copper after harvest

  6. 4

    Check what mixes in one tank

    We asked whether a paraffin oil and a copper fungicide can go in one tank. ORTH said no unless both labels allow it, because oil with copper can damage citrus leaves and fruit, and suggested separate applications. If both labels do allow it: half-fill the tank, add the copper first, let it disperse, and add the oil last. A jar test shows physical compatibility, not crop safety.

  7. Case 3

    Orange, lemon, lime and grapefruit

  8. 5

    Ask what changes for your citrus

    For the paraffin oil, nothing changes: its label covers the whole citrus group and needs no pre-harvest interval. Copper and sulphur products are different: check that each label names your crop, and never carry a clementine approval over to another species. Lemons are the most exposed because flowers, tender flush and fruit overlap, so confirm no marketable fruit or bloom is left. Limes burn more easily on tender leaves in heat. Grapefruit peel can show oil or copper marks if fruit is still hanging.

  9. For every dose question

  10. 6

    Use Advanced for doses, plans and diagnosis

    Tap the level next to the microphone. Core gives quick answers and weather checks. Advanced reasons more deeply for spray programs, disease diagnosis and fertilization plans, and can take a minute or two. Auto lets ORTH choose. Every answer in this course used Advanced.

    For citrus Stay on Advanced for doses near harvest. In these answers ORTH checked each product against Spain’s register for this crop and pest, the pre-harvest interval and export residue limits.

Tip. Give ORTH the trade name or registration number of each product. The register lists products, not active ingredients, so that is how ORTH checks the exact label.

Check yourself

1. Why did ORTH advise against diluting the spinosad bait in a full 2,000-L tank?

2. How much azadirachtin goes in a 2,000-L tank at 1.95 L/ha and 1,000 L/ha?

3. What does a jar test tell you?

4. A copper product is authorised on clementines. Can you use it on lemons?

More courses for citrus

Inputs and application

Meet ORTH at DATAGRI 2026 · Valladolid, 18–19 Nov · 10% off ORTH Teams & EnterpriseClaim your 10%