Irrigation and water for grapes
- 1
Pick the plot first Open a new chat and tap Plots (All) under the question box. Choose the plot you want advice for. ORTH then works from that plot’s crop, variety, soil and documents, and from the farm weather. For grapes Pick one plot of one variety. We picked Lote 1: Tempranillo on 110 Richter, 1.97 ha of clay soil with drip, 5,470 vines from March 2015 on a trellis with a double cordon. Harvest finished on 25 September and the vines are at leaf fall. Every number below is for that plot. - 2
Start from the Irrigation button Pick the plot and tap Irrigation. ORTH offers questions such as this week’s schedule, a water-quality check, or turning the water requirement into runtime for your system. Tap one to ask it. For grapes A vine after harvest uses little water, and clay holds the autumn rain. A schedule can also tell you to keep the valve closed. - 3
Ask for this week’s schedule We tapped Build this week’s irrigation schedule for this plot. ORTH answered with a table for 12 to 18 November: forecast rain, reference evapotranspiration and topsoil moisture for each day, and 0 mm, 0 m³ and 0 minutes on all seven. Lote 1 is after harvest, the clay is already wet from recent rain and another 12.5 mm is forecast, 7 mm of it on 16 November. Watering now would mainly add waterlogging, compaction and roots short of air. ORTH rated this four stars. The check still open is moisture deeper in the root zone, set for 18 November at 20 to 40 cm in normal, weak and wet areas. - 4
Save the proposal as actions When ORTH proposes a plan, tap Review to see every action with its date, category and instructions. Change or add actions if you need to, then tap Create. The actions land in the plot’s plans, ready to assign to someone on your team. For grapes On Lote 1 this saved the week’s schedule with 3 actions: keep the drip off to 15 November, hold through the rain of 16 November, and check the root zone on 18 November before the next schedule. - 5
Let the vine and the soil say when to start We asked for next season’s water with regulated deficit irrigation, for wine quality. ORTH leads with measurements, not the calendar. Clay stores winter and spring water and 110 Richter roots deep, so starting early mostly grows canopy and bigger berries. Do not start at budbreak by default. Start when at least two signs agree: moisture at 25 to 30 cm and at 50 to 60 cm keeps falling; about 35 to 45% of the available water is used; midday stem water potential nears −0.8 to −0.9 MPa on consecutive readings; shoot tips slow down and no useful rain is forecast. If flowering comes with the vines already near stress, irrigate. - 6
How much at each stage ORTH works from crop evapotranspiration (ETc): the week’s reference evapotranspiration times a factor for the canopy and the stage. Irrigation is ETc times the share for the stage, less useful rain and the water you plan to take from the soil. From budbreak to before flowering the share is 0 to 30%, mostly from stored water. From flowering through fruit set it is 70 to 100%, with no hard deficit. From fruit set to veraison comes the main deficit, 40 to 60%, with leaves that still work. From veraison to harvest it is 50 to 70%, and 70 to 80% for a while in heat or if berries start to shrivel, with no big catch-up before harvest. On this clay ORTH starts with events of 3 to 5 mm, not daily watering, and checks how deep each one wets. These are starting bands for a first season. - 7
Give the drip layout, get minutes We gave ORTH the drip layout: emitters of 2.3 L/h every 0.75 m, one line per row, rows 3.0 m apart. It worked out 2.3 ÷ (0.75 × 3.0) = 1.022 mm per hour, so 58.7 minutes per millimetre. An event of 3 mm takes about 2 h 56 min and one of 5 mm about 4 h 53 min. On Lote 1, each millimetre is 19.7 m³, about 3.60 L per vine. This holds only if the emitters really give 2.3 L/h at working pressure: measure some at the start, middle and end of a few lines and use the measured average. The four replants are watered apart, because young roots need small, frequent amounts and no deficit. - 8
What changes for table grapes Table grapes under an overhead trellis carry a bigger canopy and are sold on berry size, evenness and firmness. ORTH would start earlier and avoid clear stress during flowering, fruit set and berry sizing: about 90 to 100% of ETc during flowering and berry growth, and about 80 to 100% from veraison to harvest, adjusted for the variety, colour and the risk of cracking. Use smaller, more frequent events, so berries do not soften, shrivel and then swell fast. Allow only a mild deficit after veraison, when colour needs it and size and firmness are safe. Avoid big swings near harvest, because sudden wetting cracks berries and dilutes sugar. The minutes per millimetre stay the same if the emitters and the line spacing do not change.
1.
2.
3.
4.